The Radavist

Photos by Kyle Kelley

After passing away a few weeks back, Ezra Caldwell‘s work keeps popping up all over, miles away from his home studio in New York City. In fact, this bike was first built up by Golden Saddle Cyclery years back for Sean, a loyal customer living in Santa Barbara.

A singlespeed commuter is really all most people need. 650b tires provide a smooth ride and for medium sized frames, they look well-balanced proportionately. Exra had a way of proclaiming his approach with frame design by not really saying anything. While this bike may seem very straight-forward, the details in the metalwork are what first caught my eye.

The chainguard is attached by two 5mm bolts that actually pass through the down and seat tubes. Then the guard itself is incredibly elegant, especially when matched with the White Industries ENO cranks.

Stainless lugs and raw steel tubes make up the frame’s materials, with a good amount of patina forming on the steel. It must be the salt in the air. Santa Barbara is coastal, you know. The rear rack is custom, with wooden planks, which even out the overall build, especially when compared to Ezra’s signature wooden handlebars.

In a lot of ways, this bike is void of ostentation, yet meticulously detailed. Something that seemed to spill over from Ezra’s personality onto everything he touched.

____

Follow Kyle on Instagram and visit Golden Saddle Cyclery in Silverlake, Los Angeles.

I love seeing frame builders gain notoriety through supporting grassroots cycling teams. Not to say that Aaron Stinner wouldn’t be as popular today without building the Mudfoot racing cyclocross frames, but it certainly helped.

During my visit to Santa Barbara during the ATOC, Jeremy Dunn and I spent the afternoon with Aaron, riding bikes, photographing bikes and making a mess at his house.

Aaron is lucky enough to have a decent sized workspace set up in his garage and he’s even luckier to have a great ride just seconds from his front door. As his queue stacks up, Aaron continues to crank out road, cross and MTB frames for customers, who happen to be mostly from California. Many of which are looking to race on a steel frame, made in their home state, rather than buy overseas production.

Stinner Frameworks is still new in the grand scheme of things, but if Aaron continues at the current momentum, he could vary well be the next big thing…

In the past few years, Brian Chapman has shifted interest in frame building. Initially, he was half of Circle A Cycles but recently, he began building under the moniker, Chapman Cycles.

The work Brian is producing at Chapman Cycles is exceptional. Not that his work at Circle A was lacking in any regard, but going out on his own allowed Brian to really pursue his vision of what cycling truly means to him.

When I look at David Wilcox’s road frame, I see Chapman Cycle’s future, even though this bike was built years before Brian began building for his new venture. Geometrically speaking, this is a road bike with a traditional geometry, but functionally, it’s much more.

Rack, fender mounts and clearances for up to a 33.3 slick, this bike is a “long ride” road. It was built for the Oregon Manifest, specifically for David Wilcox, or as he’s known in the Northeast, “the Wilcox“.

Much like Chapman Cycles, David has gone off on a journey of his own. He just happens to be towing the new and improved Rapha Mobile Cycle Club, Tillie along with him. On his new path, he’ll be meeting up with countless group rides where, more often than not, watts and carbon are the nomenclature, not steel and plump tires.

Eventually, someone notices the brazed Circle A Cycles on the downtube, the large tires and mid-reach calipers. Or maybe they notice the spokes that were brazed onto the chainstays for chain slap protection and around the internal routing exit-port for a little added “pop”.

At that moment, David becomes the “hero” of the ride and all other technology present becomes obsolete… Well, almost.

Last weekend, I planned a route, dissected from our Super Bro Weekend ride. Four of us showed up and after five miles, my knee decided it wasn’t ready for the big day, so I bailed, only to return later in the day to shoot David’s bike amidst the rolling hills of the Austin area.

Yamaguchi’s framebuilding school has turned out some incredible talent over the years. While many enroll with hopes of becoming the next hot thing, some go to just learn the art. Chris Chou, a guy who probably has the most bikes featured on the Radavist, ever, went to Yamaguchi a few years ago to build a light tourer.

Like all Yamaguchi school frames, this bike was made from True Temper tubing and brazed by Chris over the course of a few weeks. When he was finished, he sent it off to Fresh Frame for paint.

Because Chris had never built a bicycle before, the original stem developed a stress riser, so Chris had his then housemate Ian at Icarus make him a stem. From there, the Nitto bars and Campagnolo 10 speed group add a considerable amount of class to what many would consider a utilitarian bicycle. PAUL e’rything, a Crane Bell, Mellow Johnny’s stem cap, my old Pentabike bar end and there’s a lil #JahBlessed going on with the Salsa Rasta Skewers and Ride Jah Bike button.

SON’s Edelux system and a Supernova E3 rear, lights the way and an Ostrich saddle bag holds the daily commuting needs. Cole rode this bike during the Yonder Journal (dis)Enchanted Rock Brovet and slashed a tire pretty badly on a river crossing, so Chris threw a Conti on, leaving the tires mis-matched, which I would add to the character of this bike.

I really love photographing bicycles like this.