The Radavist

2015 was an amazing year for the Radavist. Not only in terms of traffic, or stats, but in terms of content. We take pride in the site, the rides we record, products we feature and yes, the bicycles we document. This year was huge in terms of the places we traveled to and the people we met along the way. With people and places come Beautiful Bicycles and a lot of work!

Without rambling on too much, here’s a list of the Top 10 of 2015 ranked by traffic and social media chatter, from highest down…

Colin, like many of us, uses his ‘cross bike for racing only a fraction of the total time he spends riding it. When he grew tired of riding and racing production bikes that never quite fit him or his preferred style of shredding, he decided to go custom and began looking into Stinner Frameworks.

Since moving to Montana from Austin, TX, he’s been spending a lot of time exploring the many mountain roads neighboring Bozeman. He wanted a ‘cross bike with a slightly altered geometry that would still be able to hold its own at races, yet be fun and zippy on fireroads or singletrack. While a standard ‘cross bike might fit the bill, Colin’s been riding for so long that he’d developed a few particularities. First, he wanted to race the bike as a singlespeed but didn’t want to go with a slider dropout. He also wanted thru-axles. The simple fix for this is an eccentric bottom bracket which would give him the right chain tension, easily. Then once the race season was over, he could put a 1x group on the bike and take off into the woods. He raced it for a season as a singlespeed and then upgraded to a new group.

The problem is, while switching a group over from an older bike, his rear brake line was too short and no one in town, nor the neighboring towns, nor the damn mail order companies had the damn part in stock. Keep in mind, this switch-out was happening the day before he was leaving Montana for a bikepacking trip down the Pacific Coast. Way to wait ’til the last minute dude! So now, he has a brake line that even as a photographer, was painful to photograph, much less ride behind or next to. I kept thinking the damn thing was going to rip off the caliper and spray me with hydro fluid, yet it’s still in place.

While it’s not an ideal photo, or an ideal brake line setup, the bike made it down the coast to Los Angeles just fine, where we’ve been riding local dirt. Yesterday, I shot some photos of it in the early morning light. Don’t worry, the part is en route to Colin shortly, after a lengthy delay from the Holidays…

Looking past the brake lining, we see Industry Nine hubs laced to an eBay Chinese carbon rim, with a Hope cassette expander, TRP’s thru-axle disc ‘cross fork, SRAM X9 derailleur, ENVE parts throughout, WTB Nano 40mm tires and that sweet, sweet Stinner steel. My favorite detail? The paint! I absolutely love what Stinner is doing in-house and it almost distracts even me from the brake line.

Almost…

As a Radavist, I swear to shred and recently that word’s been used a lot in terms of bike reviews. Shredding doesn’t imply you’re the fastest, or the best at hucking, it’s subjective, dependent upon your skill level and the trails you ride. Here in Southern California, the landscape is arid, exposed, rocky, rutted and loose. Having a nice and nimble bicycle underneath you aids in that ever-elusive atavistic urge to play.

Hardtails are my favorite form of mountain bike. Sure, there’s a time and a place for a full sus, when the trails are steep and technical, just like there’s a time and a place for a rigid, when you want to hone in your skills like a sharpened battle axe. Having just gotten my Rosko 29r dialed into what I would consider perfection, I was a bit hesitant to take on anymore hardtail reviews.

Then Kris from 44 Bikes up in New Hampshire came knocking at my inbox with a proposal. He’d build me a Marauder 29r to demo, Fox, SRAM, Thomson, WTB, RaceFace, Industry Nine, ENVE would supply the goods and I’d get to try it out for an extended review. Nice! What’s the catch? Well, when you review a bike and you like it so much, you might just end up wanting to buy it. Dowhhh…

These frames. These freaking frames. Godzilla doesn’t have a chance against Moth Attack. With a little help from Black Magic Paint, Megan Dean’s new ‘cross team’s bikes are some of the most beautiful team bikes I’ve had the pleasure of documenting. We saw a frameset at the Portland Bike and Beer Festival, but this is the first complete I’ve seen in person and I’m glad it’s Erica Schwanke‘s! She’s a super rad woman and has been enjoying racing ‘cross in the Bay Area this season on this bike.

I caught up with Erica last week in Los Angeles, prior to the UCI race in Long Beach and stole her bike for a few minutes for photos. I love seeing people’s reactions to custom bikes like this! Enjoy…

Golden Saddle Rides: A Carbon Fiber Calfee Tandem Project
Words by Thomas “Woody” Wood, photos by John Watson

An old friend and accomplice in many of past ventures into the cycling world approached me a couple of months ago about a rather “large” project he was embarking on. At the time he was getting ready for another crack at a national championship on the velodrome. His schedule had cleared up after a very successful run of coaching our women’s olympic track cycling team to two silver medals in London. With the mind a little more free to roam, and a very fast wife to be, he wanted to do a full custom Calfee tandem. Ben had already chosen Calfee for its reputation and known ability to deliver a quality product that would meet his race ready standards. The bike had to be versatile. He wanted it to be a time trial bike and a road race bike. With the intention of racing both at Masters “old man” National Championships next year.

We both started doing some research on parts for the bike. He wanted lightweight and strong. Holding to the old aphorism by Keith Bontrager “light. strong. cheap. Pick two”. We had our work cut out for us. First was the drivetrain. Gates Belt drive and Shimano Ultegra DI2 would be a solid performer. Since the bike is a standard threaded english BB with and eccentric in the captain’s chair. Finding a modern light carbon crankset was a bit of a chore. Luckily Calfee had a couple sets of FSA SLK-SL cranks left and we were set in that department.

A big bike like a tandem requires good brakes. We went with Shimano road hydraulic disk. Once I was able to source a rear 203 IS disk adapter we were good to go. Since they are running an Enve road disc fork in front most of the braking power will have to come from the rear. Hence the larger rear disc.

Next was the cockpit. They were looking for versatility with the bar setup. So they went with the 3T Zefiro LTD option, It has a removable aero extension for use both as a TT bar and a straight road bar. And since we were using DI2 you can just unplug the climbing shifter that will be glued to the extension (the photo shows zipties), making for a quick and easy change.

Seatposts are FSA K-Force Light with internal battery holders.

For wheels we wanted durable. We have had a lot of success with the H+SON Archetype rims laced to DT Swiss 240s. The bike is thru axle and 142mm in the rear. A simple way to stiffen up the bike just a little.

All said and done this tandem is one hell of a machine. I took a couple of laps around the block on it and I must say it was one snappy bike. Out of the saddle accelerations were controlled and rather fun!

Cheers to the fun projects!

____

Follow Woody on Instagram and visit Golden Saddle Cyclery in Silverlake, Los Angeles.

The Travelin’ Man’s Firefly!
Photos and words by Kyle Kelley

Yo! What time the plane leaving?

I met Nick at LA River Camp Coffee a few months back. He was traveling through California on a true cyclist’s holiday, riding anything and everything that the state had to offer. While in LA Nick was staying at another cyclist’s Airbnb, which is how he heard about River Camp Coffee. I have never used Airbnb personally, but if I do, this sounds like the way to go. Nick had access to a local’s endless knowledge of events, rides and the best local bike shop to have a beer! Long story short, Nick knows what he’s doing when it comes to travel and I don’t just mean in the way of booking accommodations. He applied his knowledge to building his ultimate travel bike, too.

Nick’s base was a stainless steel Firefly road bike with S&S Couplers. He chose stainless steel because of the coating that naturally forms when the chromium in the steel mingles with the oxygen in the atmosphere. The passive film protects the stainless from rust and corrosion without the necessity for paint. A smart choice in my book because traveling with a painted bike almost always ends poorly. Nick also chose to use as many Ti and alloy parts as possible because of their ability to take a beating and hide scratches from afar. Even though this bike was purpose built, in no way did Nick skimp on any of the components. From the cult classic Campy gruppo to the skewers used with the White Industries wheelset, this bike is dialed.

Any travel bike is going to get beaten up, but Nick has planned ahead and I imagine his bike will look almost exactly same when we meet again. I’m just hoping it’s not in Los Angeles. I’d prefer for it to be at Shifter Bikes, where this bike was built, while I’m on my own holiday staying at a cyclist’s Airbnb in Melbourne!

I’m leeaaavvvvinnn’!

____

Follow Kyle on Instagram.