#frame-builders

tag

Starling Cycles’ Murmur Factory 29’r

Radar

Starling Cycles’ Murmur Factory 29’r

You may or may not have heard of Starling Cycles before. They’re UK frame builders of mountain bikes, including the Murmur 29’r, a full suspension, steel, made in the UK frame. Well, the UK brand has now offered a Taiwan-built version of the Murmur, called the Murmur Factory 29’r and it’s currently available to order. There isn’t much difference between the Murmur and the Factory, except cost. So if Made in the UK isn’t as important to the consumer, they can save some money. Head to Starling to see more information on the Murmur Factory 29’r.

Radar

The Sierra Shredder: a Project by Squid Bikes, Paul Component and Sierra Nevada!

This entire project is so rad, from the concept, to the Squid Bikes frame, to the build and Travis from PAUL‘s press-release, which you can read in full below!

“The bike is done, and you can have it!

Wow, remember when we sent out that last teaser press release about the sweet custom bike we were building for Sierra Nevada Brewery to show off at this year’s Sea Otter Classic?”

Adam’s Prototype Sklar Rover Single Pivot Steel Full Suspension

Reportage

Adam’s Prototype Sklar Rover Single Pivot Steel Full Suspension

Bikes. People love seeing bikes. Especially ones made by this feller, Adam Sklar. I’m going with my gut here, which is telling me to share this bike, before the story of how we got to where this unique shred sled was photographed. I’m assuming you’ve probably figured out that we spent last week in the Moab, Utah area, which is where we linked up with some people from Bozeman, Minneapolis, Tuscon, Philly and Los Angeles.

We initially rolled through Fruita, then out to Klondike Bluff, a singletrack area between Moab and Green River, to ride trails, check out dinosaur tracks, rock hound, and enjoy all that Utah has to offer. It was here, that I shot one of the wildest Sklars to date – sorry Benedict!

The Demon Frameworks KS200 Track Frameset

Radar

The Demon Frameworks KS200 Track Frameset


Photos and words by Tom Warmerdam

I saw a Rossin Olympic for the first time in 2016 and was instantly in love. This was a whole new bicycle shaped canvas to play with and I was eager to see what I could come up with. I’d already been exploring lines and slots on my other frames but this new canvas could take that to a whole new level.

I wanted my version to be visually brutal but elegant. So after designing many variations of the webbed plates I sat down and selected my favorite. Then it was time to start. I do all my own work, I don’t outsource anything. So I programmed my old CNC machine and made the plates first. Then the dropouts. I then made a frame to fit and put it all together. I didn’t like how the old Rossin was put together… lots of filler, that’s just not my style. So I brazed in the plates with silver to reduce the chance of heat distortion on the thin-walled tubes. This is a lot more work but also much more satisfying.

But then there was a long pause… partly because I had to focus on my customer’s frames but also because I wanted to use my own fork design based on Max ( I actually based it on Reynolds Speed Stream fork blades as they don’t change shape when you cut them to length) style aero blades. My friend Anna Schwinn had already helped me to translate my 2D drawings and sketches of a fork crown into a usable 3D model (I could not have done this part without her, she was awesome). Then it was a long wait for the molds and castings to be made. They arrived last month so it was time to finally finish it.

Check out more photos of this unique frame below and follow Demon Frameworks on Instagram!

Land Run 100 Rides: My Crema Duo with 700c Ibis D30 Wheels

Reportage

Land Run 100 Rides: My Crema Duo with 700c Ibis D30 Wheels

Leading up to the Land Run, I was advised by all to put 700c wheels and a fast rolling “dirt” tire on my bike of choice, that way, if it was muddy, there would be plenty of clearance. I knew I wanted to ride my Crema on the course, with its more upright riding off-road position, versus the Firefly which is more elongated as per a road fit. When carrying a camera pack, being more upright really helps out in terms of soreness and the Crema has been my go-to for such outings.

Crystal’s Scissortail Cycles SSCX with DK Pain Patina

Reportage

Crystal’s Scissortail Cycles SSCX with DK Pain Patina

Second up in the Distict Bicycles crews’ personal rides is Crystal‘s Scissortail single speed ‘cross bike. This build came together at the absolute last minute before she raced the Dirty Kanza. Crystal didn’t have any time left to paint the frame before building it up for the race. What are ya gonna do? Even if you paint a bike, racing the DK will leave it chipped, with paint damage from all the dirt and gravel pinging off the frame, so Crystal built it raw, raced it and liked the way the patina looked, so her and Bobby got it clear coated with a nice, thick coat, to ensure this “pain patina” would remain.

I love bikes with a story, and this one, in particular, made me excited to document the bike!

____

Follow LandRun 100 on Instagram, District Bicycles on Instagram, Moots on Instagram, and Crystal on Instagram.

Bobby from District Bicycles’ Oklahoma Red Dirt Moots Hardtail

Reportage

Bobby from District Bicycles’ Oklahoma Red Dirt Moots Hardtail

While in Stillwater, Oklahoma, I got the grand tour of a few of District Bicycles employees’ personal bikes. Included in this mix was Bobby’s own custom Moots Farwell 29’r. Custom in the sense that Bobby didn’t like the swoopy tubes. Luckily, he convinced the crew there to make the straightest Farwell to leave the Steamboat facility. He also didn’t want raw or bead blasted titanium.

For that, he pinged Rudy at Black Magic Paint to coat the frame with an Oklahoma Red Dirt-themed wet coat. Topping the build off with XTR Di2 and a build kit tuned for Oklahoma singletrack, this MTB actually looks damn good clean. Usually, I prefer them good’n’dirty!

____

Follow LandRun 100 on Instagram, District Bicycles on Instagram, Moots on Instagram, and Bobby on Instagram.

Land Run 100 Rides: Dani and Her Firefly All-Road SHRED SL3D

Reportage

Land Run 100 Rides: Dani and Her Firefly All-Road SHRED SL3D

I last saw this kick-ass woman at the first Grinduro. That’s over three years ago and in that time, she’s continued to crush races with what always seems to be such finesse. Hell, even at the start of this year’s Land Run 100, I hooped and hollered at her in the first few miles, to which she returned a smile and pedaled off into the dusty abyss.

Dani‘s endeavors in the cycling industry are proudly supported by Tenspeed Hero and Firefly. This year, she’s upping the ante by starting a team of all-female dirt road racers. These ladies are looking to travel to events like Land Run 100 and others, in search of competition and glory. The team is dubbed Bitch ‘n’ Grit, and is sponsored by BitchStix, a company that makes lip balms and sunblock, while donating all net proceeds to organizations that raise awareness for domestic abuse and sexual assault prevention programs.

This is the bike Dani will pedal as she joins her teammates in races. It’s Firefly number three for her, hence the SHRED SL3D and is the bike that’s dedicated to dirt road racing. I could go on for a bit longer about the bike, its integrated seat post, and her perspective, but I’d rather send you to her blog to read all about it.

Oh, and she got third place in the women’s category on this bike… Dani, we’ll see you again soon – sooner than three years! – and good luck this season!

____

Follow LandRun 100 on Instagram

Land Run 100 Rides: Mary’s Humble Frameworks Resurrected SSCX

Reportage

Land Run 100 Rides: Mary’s Humble Frameworks Resurrected SSCX

Good steel frames never die, they just get repaired. Mary got this Humble Frameworks years ago. She raced it and eventually, the frame developed a few stress risers and cracks. It took a while, but she eventually took the frameset back to Michael at Humble and he repaired the bike. Liking the way the repair marks looked, Mary clear coated the reparis and turned this ‘cross bike into a single speed dirt road bike. She now rides it at races, including the Land Run 100, where I was able to document this unique race machine.

UPDATE: Mary got third in the single speed category this year!

Best of luck to all the racers taking on the 100 mile course this year. It’s a dry and dusty one out there!

____

Follow LandRun 100 on Instagram

Land Run 100 Rides: Stu’s Moots Routt 45 with a Lauf Grit Fork

Reportage

Land Run 100 Rides: Stu’s Moots Routt 45 with a Lauf Grit Fork

Stu made the trek from the wintery north to Oklahoma and the Land Run 100. He’s the owner of Freeport Bicycle Co, a shop in Illinois, and this is his Moots Routt 45 with a Lauf Grit fork. Stu and Bailey, the new mechanic at District Bicycles throw an event called the Ten Thousand. It’s a dirt road race that combines dirt roads in the Driftless area of Northwestern Illinois. The elevation gain of the event exceeds 10,000′, making for one tough day on the bike.

Stu is here in Stillwater to support Bobby from District Bicyce’s event, the Land Run 100, because Bobby has frequented Stu and Bailey’s event in years past. It’s always interesting to see how bike shop owners equip their bikes for events like this and I love seeing bike shop owner’s supporting each other’s endeavors. Roll safe, Stu!

____

Follow LandRun 100 on Instagram

Mosaic Launches their RT-2 Stock Titanium Frame and Completes Program

Radar

Mosaic Launches their RT-2 Stock Titanium Frame and Completes Program

If you’ve been looking at ordering a US-made titanium frame, Mosaic Cycles just made it even easier to throw your leg around one of theirs. The RT-2 is now a part of a small batch, stock geometry, production bike program, allowing consumers to save time and money when ordering their new ti road frameset or complete. The frames are priced at $3,600, with completes coming in at $5,850 as pictured here, all delivered within three weeks. This pricepoint makes it easier on the wallet to experience Mosaic’s craft, details and ride experience. Build yours at Mosaic today and check out more details below.

Chumba’s Made in Texas Rastro Long Travel 27.5+ Hardtail

Radar

Chumba’s Made in Texas Rastro Long Travel 27.5+ Hardtail

With a geometry tuned for a 140mm or 150mm fork and build kits ranging from $2995 to $3595 for a complete, the Chumba Rastro long travel 27.5+ hardtail looks to be a strong competitor for those looking at buying a new hardtail. Chumba makes all their frames outside of Austin, Texas and works with Fox and Shimano components. These complete prices reflect various modes: Trail, Enduro, and All-Trail but you can request a build spec of your own and even buy just the frame. Bottom line is; the build options are endless on a more than capable frame.

Check out more specs at Chumba and I hope to get to review one of these bikes!

Nick Was High in LA on His Purple Haze 160mm Sklar Hardtail

Reportage

Nick Was High in LA on His Purple Haze 160mm Sklar Hardtail

Nick Was High in LA on His Purple Haze 160mm Sklar Hardtail
Photos by Kyle Kelley, words by Nicholas Haig-Arack

I first met Adam Sklar a few years ago while riding bikes with a bunch of frame builder friends in Santa Cruz. I was impressed by the character of Sklar’s bikes – those flattened swoops are pretty sweet, can’t deny it – but it was Adam’s personality and lighthearted approach to riding that made me really appreciate his brand. Our paths crossed again in Moab for the most fun week ever and I was convinced that I wanted a bike from Adam. Fast-forward a few months and imagine my stoke when he asked me to do drawings for Sklar Bikes! Since then we’ve been cultivating a cross-country creative partnership, one that emphasizes creativity, exploration, and good times.

Annalisa’s Breadwinner Lolo Has a Lotta Portland Love

Reportage

Annalisa’s Breadwinner Lolo Has a Lotta Portland Love

Bicycles are often the by-product of their environment, their peer group, and their community. Sure, that might be extending a lot of credit to an inanimate object, but over the years, it’s easy to see that people often kit out their bikes based on these conditions. For people like Annalisa, from Endurance PDX and the We Got to Hang Out podcast, her road bike is a by-product of her community in Portland.

Next door to Endurance PDX is a little company called Breadwinner Cycles. Perhaps you’ve heard of them? Tony and Ira, along with a very talented team, build beautiful bikes, designed to be ridden hard on various terrain. The Lolo is their classic, rim brake road bike with room for chubby road tires and a beautiful paint job. Annalisa built her bike up with Chris King parts, another Portland, Oregon-based company and wheels built by none other than Sugar Wheel Works, you guessed it, yet another company that calls Portland home.

While Annalisa was in town doing bike fits at Golden Saddle Cyclery and interviewing Jen Whalen for their latest podcast, I took this Red 22 eTap-equipped roadie to the photo wall for some up close and personal photos.

Thanks to Annalisa for being such a positive and supportive voice in the cycling industry. I can’t wait to come hang with y’all later this summer.