Reportage

Longform

Striking a Different Kind of Gold in Beechworth: Tor Bikes Shop Visit

Reportage

Striking a Different Kind of Gold in Beechworth: Tor Bikes Shop Visit

With the headlights pointing north, I departed at sparrow’s fart, my destination: Beechworth. It’s a little over a three-hour jaunt from Melbourne along the Hume Highway. The drive is punctuated by rolling hills, bouncing kangaroos, and petrol (gas) stations. Historically known for the gold rush of the late 1800s, I was heading there in search of the slightly less precious metal of steel – crafted by the hand of Shane Flint of Tor Bikes.

John’s Keyesville Classic Bike: His 1980 No Serial Ritchey Mountain Bike

Reportage

John’s Keyesville Classic Bike: His 1980 No Serial Ritchey Mountain Bike

Next week, I’m loading up the Troopy and heading West to the Keyesville Classic. Every year, vintage mountain bike aficionados descend upon the Kern valley to race vintage bikes while the “real” race occurs. This vintage race is quite the spectacle, and if you’ve never seen it in person, you ought to check out Erik Hillard’s gallery he shot a few years ago for The Radavist.

At any rate, I just finished buttoning up my bike I’ll be bringing to Keyesville to ride and, yes, take part in the vintage race. Let’s check it out in detail below…

Redemption or Rediscovery? Reflections from the 2022 North South Colorado Bikepacking Race

Reportage

Redemption or Rediscovery? Reflections from the 2022 North South Colorado Bikepacking Race

North South Colorado is a bikepacking race that traverses the Front Range, stitching together mountainous passes, singletrack, and plenty of dirt. From the rolling, exposed hills on the Wyoming border, alpine aspen groves, to the high desert of Trinidad, the 600-mile route treats riders to the full breadth of the state’s varied biomes. After dropping from the race during the inaugural 2021 edition, Leonardo Brasil toes the line again in 2022 filled with uncertainty but arrives in Trinidad (spoiler alert) with a renewed sense for ultra-cycling ambitions.

R+E Cycles Celebrates 50 Years of Community and Manufacturing in Seattle

Reportage

R+E Cycles Celebrates 50 Years of Community and Manufacturing in Seattle

There have been several storied chapters in R+E Cycles‘ 50-year history but, as Katie Sox describes, the through line has been a commitment to crafting the bikes that best fit their customer’s needs—even when those bikes have five seats. On the brink of new ownership and as they celebrate 50 years of frame building and service, read on for a closer look behind this stalwart in Seattle’s cycling scene.

Long, Slack and Steep Review: Is the Chromag Darco 29er the Best Steel Full Suspension Yet?

Reportage

Long, Slack and Steep Review: Is the Chromag Darco 29er the Best Steel Full Suspension Yet?

Coming off of the REEB SST and having ridden the piss out of my Starling Murmur 29er over the past three years, when Chromag announced its new full-suspension bike, the Darco 29er, my interest was piqued. It’s no secret to readers here that I love how steel full-suspension bikes ride, and it’s been great seeing small brands put in the PR&D on these niche bikes. After some pleading, the fine folks at Chromag shipped me out a stock build of the Darco in size XL, for me to womp around on down in Phoenix while I escaped the ice-capades of Northern New Mexico for a week. Was it love at first flight? Find out below…

Finding an Ideal Low Trail Road Bike: Soma Grand Randonneur Review

Reportage

Finding an Ideal Low Trail Road Bike: Soma Grand Randonneur Review

After spending years swapping the same worn-out parts between vintage steel frames, I was ready to build my ideal “road” bike in 2020. I wanted something that was comfortable, versatile, and beautiful, and after much deliberation, I settled on the Soma Grand Randonneur. Read on to learn why I chose the Grand Randonneur and my thoughts on the bike after two tours, a gravel race, and many long days on country roads.

The Pindus Traverse: Rock ’n’ Rolling Along the Backbone of Greece

Reportage

The Pindus Traverse: Rock ’n’ Rolling Along the Backbone of Greece

We were chilling in a hostel in Kathmandu, enjoying warm showers and the internet when I realized this Coronavirus situation was getting serious. In a few days, Ryan Wilson and I had packed up, booked tickets to wherever we considered home at the time (aka with the parents, as we were both on an open-ended bike trip), said goodbye, and flew out. It turned out to be a wise decision, as in the next weeks the world would go into hibernation.

And so I found myself swapping the tent for my childhood bedroom. In lockdown. My surroundings had never felt so tight. Mapping out routes was still not boring though. And since I found myself living in Greece again after almost ten years away it became evident that this was the perfect time to plan a multi-day bikepacking tour through the Greek mountains: The Pindus Traverse.

Vintage Bicycles: 1987 Doug Bradbury’s Own Manitou

Reportage

Vintage Bicycles: 1987 Doug Bradbury’s Own Manitou

Many different forms of cycling contributed to the development of the mountain bike, including balloon tire bikes, touring bikes, and BMX bikes. Separate from that was the influence of motorcycles, and more specifically off-road motocross bikes. The early suspension fork pioneers — Paul Turner (Rock Shox), Mert Lawwill (Lawwill), Horst Leitner (AMP), and Doug Bradbury (Manitou) — all came from motorcycle backgrounds and knew the benefits of suspension. But before that innovation came about, Doug Bradbury began by building fully rigid mountain bikes. In this edition of our Vintage Bicycles series, we look at Doug’s personal 1987 Manitou…

Four Seasons: Daniel and His Custom Black Sheep Titanium Fat Bike

Reportage

Four Seasons: Daniel and His Custom Black Sheep Titanium Fat Bike

Every bicycle has a story behind it, especially those that are dreamt up over a period of years and eventually brought to life and built from the ground up. This absolutely stunning titanium Black Sheep ‘Speedster’ fat bike is definitely no exception. One could argue it’s a bit of a stretch, but in this case, this bike’s story involves skateboarding and a decades-long journey from the east coast to the west coast, and finally the southwest.

Vuja De: Bikepacking New Zealand’s South Island

Reportage

Vuja De: Bikepacking New Zealand’s South Island

After first experiencing New Zealand‘s South Island during a life-altering thru-hike in 2015, Mckenzie Barney returns with a same-but-different journey in mind. This time astride her Kona Sutra LTD, Mckenzie reconnects with the familiar terrain through a new medium all while stitching together classic stretches of mixed-surface bike touring routes to cover the 1500km from Picton to Bluff.

Falling for Front Range Fat Biking: Josh’s 2014 Surly Moonlander

Reportage

Falling for Front Range Fat Biking: Josh’s 2014 Surly Moonlander

The first time I laid eyes on a fat bike was in 2011. I was picking up my race bib for the American Birkebeiner 50k, the famed cross-country ski race in Hayward, Wisconsin. Surly had an expo booth outside with their demo fleet of fat bikes prominently positioned so they’d be the first thing you saw. You couldn’t miss the line-up of jumbo-rubbered Pugsleys kitted out with 26×3.8″ tires, ready for a test ride. I made my way to the booth and asked about these foreign looking monster bikes. I was promptly told that I should ride one and find out for myself. As I looked down the row, I saw one with much larger tires than all the rest. It was a Moonlander, there to show off Surly’s newly announced expedition fat bike.

Semi-Supported and Ultra Rad: The 2022 Salsa Ochoco Overlander

Reportage

Semi-Supported and Ultra Rad: The 2022 Salsa Ochoco Overlander

Fresh pulls of espresso waltz through a cold September morning, dancing alongside a particular brand of nervous excitement. It’s a certain hum I’ve come to understand as unique to the start of bikepacking trips and the suckers who choose such endeavors as their vacation. Strangers who will become good friends in a few short miles clear the frogs from their throats to answer early morning queries about their hometowns, bike set-ups, and handlebar tchotchkes over hot breakfast burritos and steamy lattes slung by Autobahn Coffee as we all wait for the start of the Salsa Cycles Ochoco Overlander.

Eric’s Raw and Rusted 1985 Bridgestone MB-2 Wigsplitter

Reportage

Eric’s Raw and Rusted 1985 Bridgestone MB-2 Wigsplitter

I found this Bridgestone MB-2 as a complete on Marketplace in December of 2021. It’s January of 2023 and I’ve just wrapped up the build. The time in between was spent having some frame modifications made, aging the frame, making custom head badges and acquiring various components. Once I had my parts, the build should have only taken about a day but stretched into a week as I inched along with minor changes. The final outcome, though, is better than I could have hoped!

Brian’s Crystal FX Self Made Fillet Hardtail 29er: His Horse With No Name

Reportage

Brian’s Crystal FX Self Made Fillet Hardtail 29er: His Horse With No Name

It’s cold and blustery in Santa Fe these days so, much like Hailey, I’m riding more pavement than I’d normally like and have put riding the mountainous trails on the shelf for the moment. Winters are great for water levels in the west, especially ones like the winter we’re having this year. Not much gets me out of the house on windy days, and battling headwinds in a 20º “real feel” is not this desert rat’s cup of tea.

Yet, living in a tourist hub, I often get hit up to meet with travelers passing through town. Sometimes, they want to catch up over a cup of coffee, other times; they have a bike they want me to see. The other morning, I got a message from Brian, who was returning from the Baja Divide with a unique bike in tow…