The Radavist

We have such amazing bikes this week here on the Radavist. The thing I’ve really enjoyed about this website over the years is running into unique humans with bikes that share the same character. Justin rolled this Kermode Cycles through the door at Golden Saddle Cyclery literally the same week that you, the readership, requested more bikes with beausage and fewer show bikes.

I really felt like as a community, we put out the energy and thoughtfulness into documenting more everyday bikes with character and it made me think about New Thought philosophy. In short, this line of thought falls in with the Law of Attraction, which is the belief that positive or negative thoughts bring positive or negative experiences into a person’s life. Well, you wanted well-used, patina machines and it’s like the cycleverse was listening because this bike has plenty of patina to go around!

My friends at Chumba Cycles have had a truly inspirational story since re-launching the brand in early 2014. While the name Chumba Cycles has been around for some time in the mountain bike world, this is an entirely different company when compared to the brand that launched in California during the early ’90s. Without going into the details too much, Vince and Mark purchased the brand a few years back and began making their tig-welded steel bikes in-house in Austin, TX. Around that same time, they moved shops, and on a recent trip to the Lonestar State, I swung through to check out their new digs and see some of the bikes they were building up for customers.

Los Angeles’ Golden Saddle Cyclery is a hive for unique bicycles. From classic Miyatas to vintage MTBs and even work from framebuilders, if you hang out enough, you’ll see all kinds of bikes roll through. Blake’s Gretlein Cycles is a perfect example of some of the stunning beauties that roll through the shop.

As it goes in the pleasant winter months in Los Angeles, we get a lot of cycling tourists, rolling through town like a tumblin’ tumbleweed. Last week, my friends Brad and Rhys were in town, soaking up the sun and riding all the dirt roads LA county has to offer. Rhys was riding on this Pioneer Valley ‘cross bike and I had to document this noble steed.

Hanford Cycles calls Philadelphia their home and as home town heros, at this year’s Philly Bike Expo, they brought a subtle and subdued fendered road bike, when compared their ornate and attention-grabbing classic randonneur bike from last year’s show. Simon of Hanford Cycles worked for Bilenky for 14 years, before leaving to launch his own enterprise, Hanford Cycles. As you can see from the lugwork on this and all of Simon’s bikes, it appears to be working out for him just fine.

The details on this long distance road bike are stunning! It’s equipped with a SON hub for a generator lamp eventually, fenders, cantilever brakes for extra clearance around the fenders, and a geometry tuned for the long road ahead.

We had quite the coverage of mini velos last year, beginning with this dude’s personal bike. Isao’s Falconer was one of my personal favorites to hit these pages in 2019 because it really embodied the notion of deep custom and something we don’t address a whole lot here on the Radavist; this idea that when you get a wacky, 100% custom bike, you’re essentially getting a working prototype.

Nate from Augusta, Georgia’s Zukas Cycles brought this stunning city singlespeed to the Philly Bike Expo this year, with all the bells and whistles you’d expect from a show bike, but with durability for actual wear and tear in mind. Disc brakes, fenders and all the accouterment a gnarly North Eastern all-weather cyclist would demand but with looks and style in mind.

Yesterday we took a deep dive into the shop of Tomii Cycles. Typically, builders use their own bikes to experiment and explore ideas, concepts, and construction techniques they’ll later use on their client’s bikes. This reasoning is why I always gravitate towards a builder’s own bike when I’m visiting a shop.

My first experience with Nao Tomii from Tomii Cycles was via his old brand, 3RRR, which focused on small components like chainrings, developed in part with industrial design office 44RN. While in Boston, he learned to build bikes under the instruction of Ian Sutton, from Icarus Frames. When he moved to Austin shortly after, I began seeing his bikes pop up all over town, each beautifully constructed and specced, with color palettes so unique to the cycling industry’s normal flashy vibrancy. Nao has an eye for design, proportions, and a willingness to strive for perfection. His work is wildly underappreciated in the saturated market of handmade frames.

Casey from Mars Cycles always brings bikes with personality. For the Philly Bike Expo this year, he brought this fatbike, with an all-over logo paint job, and one of those Iozzio stem cap one-hitters the brand is calling the ‘shotgun‘. I dunno about you but I love everything about this bike!

Yes, you’re right. That ain’t gold. It’s anodizing. Drew from Engin Cycles is a master of the craft that is designing, engineering, and fabricating titanium bicycles. At this year’s Philly Bike Expo, Engin’s hardtails commanded attention with this one, in particular, bringing the bling. Its incredible anodization and design work was done by Jake Beadenkopf.

The build kit here includes the best of the best with SRAM AXS, RockShox Reverb dropper, Pike fork, and some beautiful Industry Nine wheels.

With such intricate masking and design work on a bike like this, one can only ask the question: “what will it look like dirty?!” If you’re the owner of this amazing Engin, please do us a favor and post some photos in the comments of how it looks with some dirt on it. I think I speak for everyone reading this when I say you have one stunning bike!

Over the years Stephanie and I have visited some out-of-the-way frame builders, but Sam Whittingham’s Naked Bicycles is one of the more out-there. Pedaling our camping bikes on the ups and downs of Quadra Island, an eclectic community of 2,700 people off northern Vancouver Island, we’re reminded that this is a two-speed kind of place – where the only gears you need are your easiest and your hardest.

The road narrows and the hills become even steeper, and we eventually come upon a gate, with a kind note asking us to close it after entering, for there are horses inside. We put Denver on his leash and grind the final few hundred metres to Sam’s shop, a quirky metal-roofed building with lots of windows, reflecting the even-more-whimsical shape of his house on the other side of the driveway.

If people make the effort to get here, Sam makes them feel at home. He arrives on the porch with a smile, and invites us in to his frame building shop in the woods.

With clearance for a 26″ x 3″ tire and a bright, rambunctious color combination, this Beardman Bicycles was a real attention grabber at the Philly Bike Expo. The bright colors normally could distract from the details of a bike but it’s impossible to glance over some of the unique features. For example, it has a front and rear rack, with removable rails, in case you’ve gotta bring a big ol’ pizza pie back home.

The theme of this year’s Beardman was spooky, with a skeleton losing its hand to the King Cage Many Things cargo cage and a RIP grave marker on the front rack, precisely cut by Derek at Kannaly Metal Works. Beardman makes custom racks, which pair nicely with their segmented forks and precision welded frames.

Did we mention this beaut’s for sale? Holler at Beardman for the scoop! It’d look so good covered in your home dirt.

Chris Bishop. Chrisssss Bishop. Seeing his creations year after year at the Philly Bike Expo brings all the warm feels. This year he brought an Item 4 Velo Classique road bike to display clean and elegant detailing Bishop Bikes is known for…