The Radavist

Wow. Where do I even begin here. This is the first post to come from a four-day ride from Tropic to Green River, Utah, traversing the Grand Staircase, down to Lake Powell and through the plateau leading out to Barrier Canyon, now known as Horseshoe Canyon with Machines for Freedom. The route was mixed terrain, ranging from smooth bitumen to sand and hardpack. Each rider on this journey had various setups, which we’ll go over later, but right now I wanted to showcase Alter Cycles co-owner Mason Griffith’s Pucci Cicli painted Sklar all road.

Amy’s Arrowhead 135 Surly Pugsley
Photos and words by Jarrod Bunk

Amy, a total badass, and product manager at Surly bikes set off to DFL the Arrowhead 135 this year.  The Arrowhead 135 is a 135 mile ultra race through northern Minnesota, usually set in January to take advantage of the frigid Winters. With a finisher rate of somewhere close to half, this race put your body, and gear through some of the toughest conditions.   Fully loaded and weighing in at a stout “it’s fuggin heavy” this Pugsley was loaded up to tackle the -25°F weather and save for some frozen shifty bits, Amy made it to the finish.  If you’ll be around Edgewater, CO on April 12 Amy will be talking about her Arrowhead experience at Yawp Cyclery’s Adventure Lab,  for more info on Amy’s setup and her recount of the experience on course check it out here.

____

Follow Amy on Instagram, Surly Bikes on Instagram, and Jarrod on Instagram

Fire is nature’s way of redesigning. A way to rewrite the present landscape and while the process is painful, oftentimes, the landscape is rejuvenated. Coastal California is tricky though due to its chapparal ground cover along the mountainsides. You see, chapparal – a coastal low-lying shrub – is old growth and when it’s burnt, the soil loses its stability, causing horrific mudslides. Once the chapparal is gone, there’s nothing else to hold all that dirt together. There aren’t really trees or forests like in other parts of the country along these hills and mountainsides, rather the trees find refuge in the canyons, where they can be more protected, although, with the past few years in California, there seems to be no refuge from fires.

Like many of the local riding areas in Santa Barbara, Refugio burnt a few years ago in the Serpa Fire, engulfing the fire road and hillsides, charring it to the ground. As with most fires, mudslides followed, wiping out El Capitan Ranch in the process. Local efforts have brought the area back, making this epic dirt climb ridable again. Many people say it’s better than ever. Perhaps it was the rebirth of Santa Barbara’s trails and roads that prompted Stinner Frameworks to update their Refugio all road model. Or maybe that’s just a correlation I came up with, either way, a redesign, and improvement is always good when it comes to a bicycle frame, especially one that stays close to its roots, post-burn.

Kona Big Honzo CR/DL Carbon: Good Hardtails will Never Die
Words and bike photos by Locke Hassett, action photos by Spencer Harding

Blurred lines seem to be all the rage in the bike industry these days, and with every season, a new category seems to evolve. Gravel, Adventure, Downcountry, trail…yadda yadda. While this constant categorization is overwhelming, it also means that bikes are simply getting better. Then over here in the corner, sipping scotch while the kids play beer pong and try to “find themselves”, is the humble hardtail MTB. This has been elaborated on to a great extent on this site, so I’ll spare you the poetic wax. Sure, a few folks out there are pushing the boundaries of what to expect with hardtail geometry, with huge forks and headtube angles more suited for plowing a field than climbing a fire road, but for the most part, we can look to the hardtail for consistency.

So, what happens when a company known for rowdiness and generally not caring too much about the status quo takes their tried and true hardtail model and releases a version with boxes checked for the modern consumer (read: big tires and carbon?) That’s what I wanted to find out by spending a few months with the Big Honzo CR/DL.

Big tires, short chainstays, double crankset, pick two. Normally. Then there’s the concept of a boost road bike, in which case, pick all three. I call it a concept because there’s a lot that has to go into making a boost road bike a reality. To go from 142mm rear spacing to 148mm rear you’ve got to move things outboard a bit. I’ve seen a number of cobbled together solutions for this, which usually revolve around adopting a complete MTB drivetrain from the bottom bracket spindle, to the cranks, cassette, and chainline. But what about a road bike? Or a chubby road bike? That’s where it gets interesting.

“As I was posting process photos of this bike on Instagram, people kept saying, oh it’s so Art Deco, and I didn’t know what that even was. I finally opened a book and said, yeah! It totally is. I was so inundated with it being everywhere in New York that I didn’t even know it had influenced my work so much. Art Deco is in the buildings, the subway, the gutters in the street. It’s everywhere.”

I hate to throw quotes around that saying because I’m sure I got some of it wrong but it really resonated with me. Tom Porter is a sculptor in Brooklyn, New York. His brand, Porter Cycles is a side gig for him. As a full-time sculptor and fabricator, he began building bikes in 2010 and this year at NAHBS, he brought this beautiful townie that presents an interesting dichotomy.

After a jam-packed weekend at this year’s NAHBS, we’re rolling out content throughout the week, but not without another Mega Gallery, showcasing sights and scenes at the show, as well as a handful of the beautiful bicycles on display. Later this week, we’ve got some awards from the show, so stay tuned. For now, enjoy this selection of images!

NAHBS this year has a lot more vendors this year than years prior – or at least it feels that way – making it a bit easier to see all the builders and what they brought to Sacramento, showcasing their talents. There are a lot of familiar faces in the crowds, yet what these talented frame builders brought with them are anything but.

For the past few years, NAHBS has been covered quite extensively here on the site but going into the show this year, I felt like I needed a change, so leading up to the event I had already mentally planned on covering it a bit differently, I just didn’t know how. When the show opened yesterday, I quickly found that covering it in a different manner wasn’t just an option, it was mandatory. My usual methodology of shooting and documenting bikes was not going to work. The show in Sacramento feels bigger than in years prior, maxing out space, and thus not giving me any options for shooting on the floor, so I had to think quick.

Finding a small alcove just outside of an exit, in a less than ideal location, I was able to document some bikes but found myself enjoying walking the venue talking to builders and attendees, something I rarely had time for in years prior. This allowed me to really enjoy the show and mix the coverage up a bit, providing a more well-rounded viewing experience. I’ll be presenting the show in a series of galleries this year, with most information in the gallery captions and complete bikes broken down below, so enjoy!

NAHBS is back in Sacramento this year and having only walked around the hall during setup yesterday, I can already tell the convention center is jam-packed with builders and brands from all over the US, yet it’s hard to deny the strong California presence. While Stinner Frameworks is not showing this year, Team Dream and Mavic Cycling are.

Perhaps you recall Thomson making bikes with Lynskey a few years back? Those US made frames were a unique move for the component manufacturer and even though they didn’t sell a ton of the collaboration bikes, it set a precedent for the brand, prompting this project. Yesterday, I met Mike from Thomson, who was in town en route to NAHBS in Sacramento. Mike was unpacking and building up this flashy titanium bike when I saw the Thomson logo on the downtube. While it looks like a polished, finished product, this frame is, in fact, a working prototype. Not the first Thomson bike, but one of the first bikes Thomson has developed to be made overseas in Taiwan.

Like a Phoenix, rising from the ashes of his old Niner ‘cross bike, Greg‘s new Dark Moon is a veritable do it all and do it all damn good bike. While he loved his RLT 9, there were a few things he didn’t like about it. Enough to have Greg ping Carlos at Dark Moon here in Los Angeles to make something extra special. He loves SSCX, both at the races and around town. He had his Niner set up as a SSCX and races it all season. He wanted the bike to have tight clearances, with tighter angles to offer a responsive and snappy feel.

Even though he wanted a new SSCX race bike, he made sure there were provisions and guides for a rear derailleur and 27.5 “road plus” wheels in case he ever wanted to take the bike on an ultralight tour or bikepacking trip.

When Cameron Falconer posted what looked like a miniature bike on his Instagram a few weeks ago, I don’t think I had ever seen so many people so intrigued by a Mini Velo in my life. It was kind of like that time when Ultra Romance decided to let the world know how cool Recumbents actually were. While I’m still not entirely sold on Recumbents, the Mini Velo has been on my list of super cool bikes that I’d love to own for a while now.

Do you all know what a Mini Velo is? It’s not just a miniature bike, with miniature wheels. It is a bike that fits a large range of cyclists using very few frame sizes, it usually has 20in wheels, a short wheelbase, and a rigid non-folding frame. And do you all know why this bike came into existence? As our cities become more and denser and real estate becomes more and more expensive, people wanted a small compact bike that could fit anywhere and everywhere, but still ride very much like a full-size bike. People wanted something that was compact, able to be brought inside and stored easily, without the proprietary parts and complexity of many folding bike frames.

After spending close to a month in Tucson, I got a good handle on what the cycling community is like in that wonderful city. Well, in the winter anyway, summer is another story. One place I found myself stopping by frequently for events is Transit Cycles. With Spencer’s gallery being one of my favorite Shop Visits on this site, I didn’t feel it necessary to completely revisit Transit, photographically. While they did move to a new location since Spencer’s piece, many of the vignettes and textures are still relevant to Transit’s modus operandi. I did, however, feel compelled to check out their new space and hit some highlights, and as the title implies, to shoot the owner, Duncan’s, Black Cat All Road.

Snow in the High Desert

Hell, we need snow in the Southwestern United States, especially in what is called the Four Corners. All winter, riding plans have been put on hold for Mother Nature’s cool embrace as our landscapes get covered in a thick blanket of soil-enriching snow. With warmer temps, the crypto soil locks in as much moisture as possible, giving water to our desert flora friends. Needless to say, when it snowed over 14″ in Sedona I was a bit sad. You see, Salsa sent out an invite to ride in Sedona last week – to take on some of the best the area has to offer on their newly-designed trail bikes.

The Crust Bikes Evasion is a production bike that set the bar for versatility in a production bike made overseas. Previously, this sort of frame was only tapped into by small, one-off framebuilding outfits, which can run a pretty penny and have long wait times. Wanting to address this market with affordable options, Matt from Crust Bikes has built his brand off of supporting the niche cycling world’s demands. Only thing is, what was once a small niche is now a substantial portion of the market’s interest and Crust Bikes has grown with it.

Take the Evasion for instance. A do-it-all dirt tourer, designed for the 26+ platform, but will also roll just as smooth on 27.5″ wheels and tires. As Matt from Crust describes the Evasion: “It’s a randonneur bike on steroids, “The Satanic Rando” if you will. Comfortable for the long haul, but fast and nimble, while still being ready for some pretty technical/rough riding; if that’s what the route throws your way.”

What a genius copywriter!

Hanson’s Evasion is raw steel, with a few coats of spraypaint clear, 27.5″ wheels, a 1x drivetrain, and loaded with his brand’s, Dark Realm, prototype bags. How else can you tell if your bags really work without putting them to the test? He races XC MTB races in Austin on this bike, does tours, dirt road rides, trail ripping, and straight up rips the rocky trails of Austin’s Greenbelt on this beast. An ex-pro BMX’r maybe he just feels more comfortable on a rigid bike?

As for the Dark Realm bags, keep an eye on their Webshop for new product drops, or hit him up on IG if you have a request.

____

Follow Hanson on Instagram, Crust on Instagram, and follow Dark Realm on Instagram.