The Radavist

The first-place prize for Sim Works’ Social Reform Benefit Raffle is this Doppo ATB tourer, built by Shin in Japan, and decked out with a selection of Sim Works, Chris King, and Paul parts. Let’s check it out in detail in order to ramp up support of this great cause…

The Kenai 250 is a 257-mile, self-supported mountain bike race in the Kenai peninsula, the only area in Alaska with a large network of singletrack trails maintained by the forest service. The race organizer, Michael Braun, stitched together a route that connects the trails with highway miles. It’s 60% singletrack and 40% pavement. The race has been going on since at least 2013. This year, with 36 starters, it’s a record setting year for participation. This will be my first time racing it. I grew up in Alaska. It’s amazing to have the opportunity to ride and race in my home state. A couple weeks ago, Rue and I went out to tour the trails– several of which I’d never ridden. In a single day, from my bike seat, I saw a moose cooling off in a pond and both a lynx and a grizzly bear crossed my path. Alaska is still very wild. I’m really looking forward to riding through the night and experiencing this full route in one go. It would make a great multi-day tour as well.

Over the past few years, I’ve found myself only riding 150mm travel hardtails and full suspensions with slackened front ends and steep seat tubes. In my mind, why would you want anything else? Then I moved to Santa Fe, where we have even bigger backcountry loops, steep climbs, and long, rocky descents. Yet, we also have sweeping, undulating XC trails. Suddenly, all those 150mm bikes are a little too much for a lot of the trails here, most of which are in my neighborhood. Then Chumba came to the rescue, sending along their Sendero 130mm 29er hardtail for me to review and I fell in love with XC bikes once again.

Read on for how this beauty of a bike handles our chunder and Chamisa-lined trails here in Santa Fe…

Where do we even begin here? Boone is what I would consider a friend. Someone I met years ago in Portland who is now in Bend and still doing what he loves: making rad shit. Right now, however, he’s making rad shit for himself. When he and I first met, he was working for Argonaut Cycles but that wasn’t his first framebuilding job. As with everyone making bike frames, there’s a story to tell, and that’s what we’re doing here today, so sit back, turn on some metal, and check out the wild shit inside Boone Metal Fab.

“Gravel bikes are just XC bikes from the 1990s.” “What is this, a 90s XC bike?” “Everything old is new again!”

Read any “gravel” bike review here and you’ll see some version of one of these statements in the comments section. People love to say that modern gravel bikes are just mountain bikes from the 1990s. Well, I hate to break it to ya but they’re not. They might be the same in that a 1996 Lemond road bike is like a 2020 Specialized Roubaix. It has two wheels, a crank, bars, seatpost, and a saddle, plus a lot of other parts but let’s be honest, nuanced bike design is a lot of what we cover here at the Radavist.

This is a 1996 Ibis Mojo built up like a “gravel bike” and yeah, it might be similar in spirit but there’s a lot going on here. Let’s take a closer look…

Last summer I was lucky enough to make my pilgrimage to Nutmeg Country while on a work trip to NYC.  While getting a tour of Benedict’s “childhood home”, he showed me the bike pile in his basement.  He looked at me and said, “Spencer, you need something classy, pick whichever frame you want.”  Of course I picked the rusted Romanceür prototype…

Hydraulic shifting? 13 speeds? What in tarnation?

That’s what was going through my head when I first saw Rotor’s 13-speed drivetrain kit at Sea Otter last year. The 1×13 kit is a follow up to Rotor’s Uno 2x groupset from four years ago. Like the Uno, the 1×13 uses hydraulically-actuated shifting for a groundbreaking industry first. As you might imagine, this tech is pricey, and probably not for everyone, myself included, but over the past few months, I’ve enjoyed riding it on this beautiful titanium chassis by none other than Merlin Bikes. Check out a full review of Rotor’s 1×13 and the Merlin Sandstone Gravel bike below.

If you’re reading this, there’s a high probability you’re into bikes. Being “into” bikes comes in all sorts of flavors: racers, tourers, shredders, gear heads, collectors, vanilla, chocolate, twist. However you identify, spending time and money building, fixing, riding, and re-building is all part of it. Exposure to the melange of personalization across the cycling continuum is a big part of what the Radavist does, in addition to sharing the passion and creativity of the people behind the bikes. People who are into it. People like Karl.

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so we’re doing just that…

Out of all the bikes I personally reviewed or even rode last year, the Cannondale Topstone carbon was not my favorite. Yet, I really loved the 2018 aluminum Topstone! Go figure. As I stated in the initial review, it felt too gimmicky for all the engineering that went into it. I felt like it was lacking something extra to truly make it stand out from Cannondale‘s history of making kooky, yet practical suspension bikes. A whole year has passed but my wish would finally come true. Was it worth the wait or the extra engineering? Read on below to find out.

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so this week, we’re doing just that. Here’s Kevin’s Gravel Packer, complete with paint by Jordan Low and Andrew the Maker bags…

Over the past few weeks I’ve enjoyed becoming re-acquainted with an old friend. As I’ve been slowing back down to a more creative and contemplative speed, un-encumbered by “normality” or any other external influence and bolstered by the vivid dreams associated with normal sleep patterns, a relaxed mind and inappropriately timed cheese consumption, I’ve settled nicely into fat tyres and riding fixed on sandy beaches. As the salty air of coastal living coupled with a lack of access to spares, tools and equipment that allow our bikes to keep rolling, caused the rideable bikes of our household to drop like flies. I was forced to delve deep into the museum of slightly broken bicycles that is my loft.

This year was to be the first year Nao Tomii of Tomii Cycles was going to attend NAHBS. For a small builder like Nao, spending the kind of money it takes to pull a seat up to the table of the USA’s largest hand made bicycle show takes a lot of financial planning, so when NAHBS was postponed this year, Tomii Cycles wouldn’t be able to attend. Most builders display customer’s bikes at NAHBS and asking his clients to wait four more months for their bikes, especially during a pandemic was out of the question. I reached out to Nao and asked if we could display his bikes here at the Radavist, so this week, we’re doing just that…