The Radavist

The almighty basket bike. It doesn’t need to be fancy. Doesn’t need flashy components. Just build it out for practical uses… like wallrides!

Earlier this year, Bailey got the idea to convert this older Rocky Mountain Hammer frame into a basket bike. His intent with the bike was to have a no-nonsense, do-it-all beater that he could lock up anywhere and not worry about it. Yet, because it’s Bailey, there was a twist to this bike’s use…

My first taste of full suspension came when I was working as a wrench at a shop in Quakertown PA just after graduating from college and not really having a plan. On mornings off, I’d take out a demo and ride the local trails up on South Mountain in Emmaus. Those bikes were terrible. But at the time, I was young and loving any bicycle I could get my hands on. That was 1998. A degree project when I went back to school confirmed I didn’t have a clue about geometry, handling, let alone suspension kinematics. Fast forward to 2012 when I hung my shingle out starting 44 Bikes, I became solely focused on honing geometry and understanding fit. But deep down, I wanted to build a full suspension bike but I knew I wasn’t ready. Which brings us to the here and now. Things began to click after building hundreds of bikes and dozens of prototypes where I finally felt like I had a grip on geometry and handling. I wanted a new challenge. So in the Spring of 2019, I started acquainting myself with a platform I had largely ignored.

Sometimes a bike is worth more than the sum of its parts. You know, that feeling of home that isn’t just about having your favourite bars and saddle in the right place. My Kona Unit began life as a $999 single speed complete – a heck of a good value, and a bike I never knew I’d come to love so much.

My normal yearly schedule usually includes a visit or two to Portland, Oregon, a mecca for bicycle framebuilders. Over the years, I’ve been a part of documenting the projects that come out of the Vanilla Workshop, so when a sweet project like this comes along, I like to elevate it to the Reportage section of the site. Sure, this bike isn’t going to be for everyone, nor is it by any means accessible, but as cyclists, we should be able to appreciate beautiful pieces of craft and thoughtfulness. At least that’s how I look at it!

Anyway, this Vanilla Classic road bike build with custom CycloRetro Engraved Shimano Dura Ace is a blast from the past… and that’s its intent! Read on below for more words and beautiful photos from the Vanilla Workshop.

As I drive home to Barcelona from a photoshoot in the South of Spain, I dream about the next three days. They will be calm and tranquil while I worked from home. Then, my phone buzzes with a message from Mike, a friend and owner of a bed and breakfast in the Pyrenees Mountains in France. He needs help with a last-minute photoshoot further north in the Basque Country. By last minute, he means tomorrow. No time for a rest. I live for photoshoots. It’s my job. My passion. The lure of home will have to wait, as the car stays packed and continues northward toward France.

A few hours later I am in the French Basque Country, in the town of Saint Jean de la Luz. Mike has brought me to his friend, Julien’s house. It is like the rest of the neighborhood, an etxea, in typical Basque construction with white walls crossed by solid timber beams, covered with a clay terracotta roofs. And there in this iconic French village sits the subject for the day. It’s a fresh, stainless steel 2-11 Cycles. So fresh that it’s barely been out on the road yet.

Just before Covid hit the US and races were canceled indefinitely, I had a conversation on a ride with good friend Brendan Lehman (who is sometimes, more often than not, known as the official unofficial mis-manager of the Rock Lobster race team) about joining the risk of Lobsters and racing on a custom frame built by Paul Sadoff himself. I’d been riding with the Rock Lobster crew here in Santa Cruz for several years and we all seemed to share a common bond in doing remarkably stupid endurance rides, putting mental and physical limits to the test for fun and adventure. Since I first laid eyes on one, there has always been something alluring to me about a classic, team issue, seafoam green Rock Lobster. Not only will I get to ride and race on this custom bike built for my body dimensions, but I also get the pleasure to ride it with the builder himself. As a photographer, I figured it would be great to capture the build of my custom frame from start to finish and get to know Paul a little better in the process.

I’ll be honest, the thought of a new bike is not something that really gets me terribly excited these days.  The places it can take me and the people I will meet along the way?  Definitely!  But when a post pops up on this site or any of the other bike-related sites I visit that starts getting into new-fangled hub spacings or microscopic geometry tweaks and angles, my brain tends to glaze over and forcibly pushes my hand toward clicking on the next article.  The things I look for when selecting a bike for my next big trip are based almost entirely on practicality and reliability.  I just want a bike that I don’t have to think about.

With Covid-19 throwing a wrench in the spokes of the traditional tradeshow schedule, even open houses have had to switch to an online, or virtual, format. We saw this earlier in the year with ENVE and now, the 2020 Chris King Open House. While it wasn’t safe to travel to Portland to document the bikes, Chris King’s in-house photographer Jacob Olsen did a stellar job at documenting all ten bikes, while videography team Modify Content knocked out some great, in-depth video profiles of these handmade marvels. We’ve got part two today, featuring Pursuit, Rock Lobster, Sage, Speedvagen, and Sycip, so let’s jump right in…

With Covid-19 throwing a wrench in the spokes of the traditional tradeshow schedule, even open houses have had to switch to an online, or virtual, format. We saw this earlier in the year with ENVE and now, the 2020 Chris King Open House. While it wasn’t safe to travel to Portland to document the bikes, Chris King’s in-house photographer Jacob Olsen did a stellar job at documenting all ten bikes, while videography team Modify Content knocked out some great, in-depth video profiles of these handmade marvels. We’ve got part one today, featuring Bingham, Breadwinner, Caletti, DeSalvo, and Mosaic, so let’s jump right in…

One of the joys this website has brought me over the years is helping out small companies jettison their products into the world. From component manufacturers, apparel brands, frame builders, and yes, bag makers, there’s something special about watching a brand bloom over time and having been a part of that process. Last week, I met this fella named Jeff at Sincere Cycles where he showed me a new prototype bag he’s developing under the moniker Agave Products called the Arroyo Backpack.

Jeff and Agave are based in Austin, Texas, my old stomping grounds, and so this project plucked at my heartstrings a bit. Read on for a more in-depth look at the Arroyo Backpack…

Northern New Mexico’s section of the Continental Divide Trail is quite the experience and with its popularity, more and more cyclists are coming to New Mexico to ride 70 miles of singletrack over a 90-mile route. One of my friends, Kyle from Outer Shell, recently came through town with his Falconer hardtail to take on the CDT, so I shuttled him to Cumbres Pass and bid adieu. After his trip, I linked back up with him and shot his wild Falconer hardtail, “loaded” for his time on the trail…

We’ve featured Cari’s Elephant National Forest Explorer before, back in 2016, and yet every time it pops up in our social media here at the Radavist, people request an updated feature…

There seems to exist a set of truisms in mountain biking: your next bike will always be better than your last, my local trails are harder than your local trails, and the fastest local rider isn’t on Strava and humbly rides a singlespeed. Then there’s the local legend, a misfit rider, the slightly anachronistic character that emerges on the trail mid-group-ride on a hardcore hardtail who rides loose and fast and with reckless disregard.

When Kona announced the Honzo ESD earlier this year it came as a great surprise. The original Honzo has remained relatively unchanged since 2012 and this new version looked like a poolhall brawler by comparison. Dominated by modern geometry, BMX inspired frame lines, and a build kit suitable for Bender himself, it was clear this was going to be no ordinary Honzo…

This is a story of how progressive values and a penchant for both unusual bikes and unusual beer can combine to create the ultimate rambling ride. Most bike designs fit into neat little categories, and while those neat little categories work for most people, there’s a wild world of flavour out there, if you’re willing to take a risk here or there.