The Radavist

It’s no secret that Pale Ale is Paul from Paul Component Engineering’s favorite beer, and this will be our 4th year collaborating on a custom bike for Sierra Nevada Brewery to show off at Sea Otter and give away to a lucky winner. This year we decided to raise the bar by building up TWO bikes, and using them to help out two of our favorite trail stewardship!

You may not know me but maybe you’ve heard of my company? Well, I’m using this article as the official announcement of my debutante summer, The Summer of Cheech. I’m Cheech, Co-Owner of Crust Bikes and Creator/ Designer of Casa Verde.

We took a look at Baphomet Bicycles earlier this year and in that post, we discussed the ideology surrounding the iconography of this unique framebuilding operation, nestled in the mountain town of Taos, New Mexico. If you haven’t read that piece, you really should check it out first.

Yesterday I caught up with Dillen from Baphomet Bicycles, as he came to town to ride the BFL, an event Sincere Cycles throws each year, offering a classic 55 mile loop with over 10,000′ elevation gain and a “B” loop with 38 miles and 6,400′ elevation. Both take you deep into the Sangre de Cristo mountains at the terminus of the mighty Rocky Mountains. Doing either singlespeed is quite the undertaking!

Dillen finished this build right before the event and drove in from Taos for the day. We pedaled together briefly and then his chain exploded about 10 miles into the ride, sending him back down to town. Later in the day, we caught up to shoot his new 29er hardtail, aptly named the “Left Hand Path”, so let’s check it out in detail below!

Many of you are obviously familiar with the brand WTB, or Wilderness Trail Bikes. They make awesome tires, saddles, wheels, and other accessories but for a long time in the decade following the birth of mountain biking, they made all sorts of bicycle components including headsets, handlebars, bottom brackets, frames, and more. We reached out to Mark Slate, one of the founders of WTB for his thoughts on one of the most iconic bikes to leave the WTB and Steve Potts workshops: the Banana Slug, Steve Potts #45. I documented this wonderful dream bike – don’t you want one? – this was a joy to shoot for our Vintage Bicycles feature and I am honored to have Mark’s thoughts on it here at the Radavist. Read on for Mark’s words and Steve’s handiwork below!

Today we’ve got a special bit of Reportage from the crew at Squid Bikes showcasing their new handmade in Taiwan steel gravel model, the Gravtron. Read on below for a look at the owners’, Chris and Emily, personal Gravtron builds as well as a friend Nick’s bike loaded down for a trip from Reno to Sacramento with a trip report by Emily. Check it out below!

Last month, bikepackers from all over the country gathered in the southernmost Oregon Timber Trail Gateway Community of Lakeview for the inaugural OTT700 Race. Lakeview’s mayor, Ray Turner, set up his famous BBQ station the evening before in the city park and treated the racers and their families to a final warm dinner before days of eating ramen and snickers bars. It was great to see the camaraderie already building between riders and proved the value of bringing the rider community together around an event like this.

For this edition of our Vintage Bicycles showcase, we present the unique 1989 Otis Guy mountain bike, built with Suntour, which was displayed at the Braunstein-Quay Gallery ‘Art of the Mountain Bike’ showcase. The current owner, who is loaning this bike to the Pro’s Closet sent over the story of how he acquired this unique ride, so read on below for Eric‘s words and yes, the chain is out of alignment in the photos. John blames that on the bright sun… ;) Check out the full spread below!

A framebuilder’s personal collection is a window into their mainstays and their experiments. Yesterday we brought you the story of BC-based builder WZRD. bikes, where Em is expressing their viewpoint on the world through fillet brazing, progressive geometry, and progressive politics.

Today we take a look at three bikes Em has built for themselves: their BCXC “big” bike, their XCXC “little” bike, and their 26” park bike. These three bikes, WZRD. frames 11, 18, and 22 respectively, represent a lot of what Em is up to with WZRD.™ geometry, but is just skimming the surface of what they’re up to down in that dungeon.

These bikes are all ridden, HARD. That means they’re not perfect and that’s exactly how it should be. Since these are Em’s personal bikes, I’m going to pass the mic to them now. Make sure to click through to the gallery to peep all the details.

Rigid bikes. The roots of riding off-road, yet now the arena of weirdos, quacks, and masochists. Mountain biking started out long before telescoping forks and complex linkage designs, but the bikes of those early days are now a far cry from the activity most consider “mountain biking”.

Of course, those weirdos, quacks, and masochists still have a place in this world, and it turns out I’m one of them. It wasn’t always this way. I used to ride and write about my experience with suspension mountain bikes as a full time job. I could go on all day about spring curves and axle paths, dampers and volume spacers, sag and suspension setup.

But, in the past five or so years, my focus has shifted. I’d rather spend a weekend riding to small places and sleeping out under the stars than shuttling the local loamers and crushing parking lot beers. And in that time I’ve come to value a mountain bike that requires less maintenance.

Having ridden a lot of high end suspension bikes, I know what it takes to keep them running tip top – and I just don’t have the facilities to do that at home, nor the money to pay someone else to do it. A rigid bike makes sense for my sometimes bi-weekly, sometimes monthly mountain bike hobby.

The word supple gets thrown around a lot, mostly related to randonneur, road, or gravel bikes with a bi-plane steel fork and typically, rim brakes, yet I’m convinced I’ve built the most supple, modern mountain bike, just in time for our San Juan Hut trip this week. Check it out in detail below…

The Norwegian city of Oslo recently played host to the Service Course Oslo‘s Bikes of Oslo Showcase, featuring a plethora of custom bikes during a weekend of riding and soaking in the summer sun. We’re honored to host the report here, at the Radavist, featuring the bicycle photography of Magnus Nordstrand and the riding/lifestyle shots from Herman Ottesen. Check out the bikes along with an interview with the Service Course’s Jonas Strømberg below…

Continuing our Vintage Bicycles feature with this cherry red Richard Sachs with a stunning Campagnolo 50th anniversary kit…

Chumba Cycles has been supporting ultra-endurance and all-around badass athlete Alexandera Houchin for some time now, outfitting her with a variety of bikes for her endeavors. Yet with the announcement of Chumba’s in-house titanium manufacturing earlier this year, Mark and Vince, the owners of Chumba, wanted to get Alexandera on some new frames. You might recall our coverage of the Sendero Titanium from this year’s ENVE Builder Round Up. After the show, I reached out to Chumba to see if they’d share some photos of Alexandera’s new bikes, so let’s check them out below…

I grew up working at a Specialized shop, and learned how to mountain bike by watching Ned Overend’s Performance Mountain Biking technique VHS. While I always appreciated the refreshing ideas of small makers, I thought it advantageous for larger brands to be able to invest more in their materials and construction. This was a time when top-end bikes were made of metal, and made domestically.

Metal Matrix (M2) composite is a prime example of this. The big S sourced a 6061 alloy infused with an aluminum oxide ceramic particulate by Alcan. Say that again, backwards now. Alcan called it Duralcan, and I am proud to display their logo on my top tube—that cool typeface!

This bicycle named Lil Romeo was chosen for my first attempt at the Tour Divide based on trust built over the years of adventuring together. A Reynolds 853 steel Crust Romanceür that I’ve ridden for 4 years in 4 different United Nations recognized countries. The custom frame bag that held food, 3 liters of water, and often a can of nitro coffee has the Tibetan national flag that is not recognized by the United Nations. I love this flag almost as much as I love this bike. Not for the sake of Nationalism, but for the sake of Beauty. Lots of parts on this bike were selected for beauty, practicality, and nostalgia.

Continuing our sporadic coverage of our Vintage Bicycles feature is this rare J.P. Weigle Ice Cycle. Due to the nature of this creation, I reached out to Peter Weigle himself to see if he could fill the readers of the Radavist in on this stunning bike. Check out Peter’s story below accompanied by a plethora of photos…